Mahoney's Walnut Oil and Wax

For years now, Mahoney’s Utility Finish has been our go-to finish for salad bowls and wooden utensils. It’s made by professional woodturner Mike Mahoney.
Mike produces hundreds of bowls each year and needed a durable, nice looking, food-safe finish that can be easily and safely re-applied by his customers. Unsatisfied with what was available, he produced his own finish. Once Mahoney’s utility finish is dry, it’ll leave a rich, durable food-safe finish that won’t evaporate and lasts a long time.

Mahoney’s finishes are made with pure Walnut oil that is very high in linoleic acid. This particular acid is what gives the oil its ability to dry and sets it apart from culinary walnut oils sold at grocery stores.

Prepare the Work

Before applying the finish start by making sure your piece is sanded through at least 400 grit and has been wiped clean of dust.

Wiping bowl with clean paper towel.
Sand through at least 400 grit and wipe the work clean before finishing

Finish with Utility Finish

Brush or wipe on a liberal coat of Mahoney’s oil onto the piece. Let it soak in for about an hour.

Pouring walnut oil finish onto bowl.
Apply a liberal amount of finish
Wiping oil finish with a paper towel.
Wipe or brush the finish on
Spreading oil with a paper towel.
Cover the entire surface with the oil

Check it every 15 minutes or so and add more oil to any dry spots that may show up.

Inspecting bowl for dry spots.
Check for dry spots where the finish has soaked
Applying oil finish with a rag.
Apply more finish to any dry spots

After it has had an hour to soak, wipe it dry with a clean cloth. Always properly dispose of the oily rags by laying them out to dry before discarding them.

Laying rag flat on a table.
Always air oily rags out before disposing of them

Your project is safe to use even before the oil hardens.

Finish with Walnut Oil Wax

You can leave this as a stand-alone finish, but I’ll add some walnut oil wax to build the sheen up a little more.

You’ll want to give the oil a few days to harden in a room temperature environment before applying the wax, because if the wax is applied while the piece is wet, you’ll just be smearing it around.

Now that this piece has had a few days to dry, I’ll rub the wax on with a soft cloth. Let it sit for about an hour, then buff it dry with a clean soft cloth or buffing wheel.

Loading paper towel with wax.
Let the utility finish dry on the piece before applying Walnut Oil Wax
Applying wax to bowl with a paper towel.
Rub the wax on with a soft cloth

You’ve now got yourself the perfect walnut oil finish that’s food-safe, all-natural and very easy to maintain.

Showing the finished bowl.
Bowl finished with Mahoney’s Finishes

After using your salad bowl for a while, you may need to re-apply a coat of walnut oil wax to keep the wood from “drying out”. Just follow the same steps when you need a fresh coat and you’re good to go.

Products Used

Mahoney’s Finishes Utility Finish
Mahoney’s Finishes Walnut Oil Wax
Nitrile Gloves


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.